Toshiba 51H94 - Tuning to the Next Programmed Channel; Tuning to a Specific Channel (Programmed or Unprogrammed)

A ÷ L
Tuningchannels
Tuningto the next programmed channel
To tune m the next programmed channel:
Press CHANNEL A or V on the remote control or TV
front panel
Note:
* Th/sfemVmwillnetwefl<unles_yeupregran_channdsintotheTV_
channd memoly (see page 4 0
* If you use tl_e T1/_remote can_e/to stuartrecording yau will not
be able te d?ange the d?anne/ clu/2W recording1
ffyau zz__ea device other i'han the T1/3remote central to start
mcordinrj and J?en d?ange the d?arlneL the r_c-arded audio and
video will be that all'lie CUrTent/y tuned d?anne/
Using SpeedSud to change to a
specific programmed channel
Note: 777isfeaturewillnot wad<unlessyeu pregmm charnels
intothe TV_charted memory(seepage40
1. Press and hold CHANNEL A or T fbr a tbw seconds. The
TV will enter SpeedSurf mode.
Channel label
Upperchannels
t
Current channel (highlighted)
Lower channels
2, RepeatedIy press or hdd CHANNEL ,A or V whiIe the
SpeedSurfmode is on-screen to scroll through the channd
list. Rdease d_ebutton to display d_ehighlighted cham_d.
Tuning to a specific channel
(programmed or unprogrammed)
Tuning analog channels:
Press the Channel Number buttons ((t-9) on the remote
control For example, to sdect cha*md 125, press 1, 2, 5.
Tuning digital channels=
Press d_e Channel Number buttons ((t-9) on the remote
control tbl[owed by the - (dash) buuon and d_en the
su/>charmel number.
For example, to select digital channd 125-!,
press 1, 2, 5,-, 1.
Note: ira d/g/tJ/ &arlnel is not pmc, amnred eithel thmluh
the auto/natic d?anne/ scan (page 40 or the d?aend
add/delete h_nctien fd>lge 42) you win ?}avete Lune the RF
dlannd usTngfl?e Channd Numbe/ and Dash buttons on the
r_mote cantloL
Switching between two channels using
Channel Return
The Channd Return tbamre allows you to switch beEweentwo
channds wkhouE entering an actual channd number each time.
1. Select the first channel you want to view.
2. Sdect a second channd using the Chamld Number buttons
(and the dash (-) burton ifsdecung a digital channd).
3. Press CH RTN on the remote control. The previous
channd will display.
Each dine you press CH RTN, the TV will switch back and
fbrd_ between the last two cha*mds d_at were selected.
Note: Ifyou press CH R_V fie/n a non antenna input, the 7V
will tettJm to the/as>viewedANTk_put and channel
Switching between two channels using
The SurtLock TMt:eature temporarily "memorizes" one channd
in the CH RTN button, so }ou can return to that channd
quickly fl'om any other cham_d by pressing CH RTN.
To memorize a channd in the CH RTN but:t:orl:
1. SeIect the channd you want to program into the CH RTN
bUEEOlL
2, Press and hold CH RTN fi)r about 2 seconds until the
message "Charmel Memorized" appears on d_escreen. The
cham_d has been programmed into the CH RTN butrom
3. Continue to change cham_ds until your desired cha*md is
selected.
4. Press CH RTN. The memorized channd will be sdecte&
The TV will return to d_e memorized channel one time only.
Once you press CH RTN and then change channds again, d_e
CH RTN button memory will be cleared and the button will
f'unction as Channd Return, by switching back and fbrth
between the last two channels that were sdected.
o_o,@®®
_o® ® Ch_nneENumbe,_
(_ - (dash)
CHRTN
Copyright @ 2004 TOSHIBA CORPOFtATION, All rights reserved,
69
H94(E)O67-76(8a-UseTV)
69
÷
813/04, 6:08 PM
÷
r