A ÷ L
Controllinginfraredremote-controlleddevicesthroughthe TV 0 Rpass-through)
You can use the TV's IR OUT jack (infrared pass-through)
to rernotdy operate (through the TV) many infrared
remote-controlIed devices (such as a Toshiba infrared
remote<ontrolIed VCR or DVD phyer) enclosed within
an er_tertainment center or simihr cabineE. Without d_e
IR OUT cormecuon, the device typically would need to be
visible to operate it remotel>
You will need:
To
1.
2.
one dual-wand IR bhster cable (included with your TV)
edger audioAideo cables as required to connect d_e de, ice(s)
to the TV (see pages 12-2(t)
connect the IR blaster cable:
Locate the infrared sensor on the front of your device.
This sensor is marked on some de_ices.*
Align one of the IR blaster cable's wands abouE 1 inch away
from the infrared sensor on the front of the device and
attach it using double-sided mounung tape. If you have a
second device, attach the second wand in a simihr manner.
(Seeil&stszldov at r/get.)
Note: Ifyou & tierhaveaseconddevice,coilthesecondvgmld
withattJ/)befba/Tda/Tdleaveh"behindtheTh'
3. Plug d_eIR bhster cane's plug into one of the TV's
TheaterNeE OUT jacks.
To control the device(s):
Point the TV remote controI
(programmed to operate the device;
see Chapter 3) or the device's remote
controI at the front of the TV and
press the btt[Eontbr d_edesired
fhnction_ The signal passes from d_e
remote control through the TV to
the device via the IR bhster cable.
Note:
* Ifyouusethedevk-e_femotecontfol
to opet7;te the dewc< you also w/7/
need to use the TV3 ferr_ote coffffol i_)
ope/ete the 77/
o Fbr addmona/control opOons, see
"TheatedVet on screen dewce coRtlo/"
at tT:qht
H you oamtot locate the device s infrared sensor:
1 _;m OFf--the devTbe
2 Stambg at the/owet left co/77erof the device, place the e/_d of the
device _ f_mote cofTtfo/ f w/th the/TJlTff_d efTi/ttel_ so/t touches the
front of the dewbe and p_ess POWER (Do not use the F1/'_f_mote
control fo_ this step)
3 ff the device turns on. the pbee the temote control touched the
dewbe /s the/ocat/bn of the sensor:
4 /fthe dewbedoesROt ttJt72On, Yl2ove the te/7_olD oofTt/eIsl/ghtly I2) the
light and press POWFR aga/b
5 Repeatstep 4 uiTt/Jyog!locate the dewce}/bfl_f_dseosoL
Deerel IR-centrelledBVBplayer{for example}
TheaterNet on-screen device controU
For additional controI options
fbr y)ur home d_eater system,
set up the TheaterNet on-screen
device controI fbature. You can
use this fbature to control many
[R remote<ontroI1ed devices
and IEEE-1394 devices using
the on-screen control icons.
See pages 44 48 for det;ds oo
setting up and usifw Yheate/?Yet
See pacjesP2_4 for details oft
connecting/EEE 1394 devices
Note: The T/?eatee'\Jetioo/_controls are the
only device furTctions aw}ilg_bbwhet7the ieofTs
ale OR Sol_e5 7_) access ethel device
fufTO[iOl_& close file 77}eared\letico/_ window!
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
21
H94(E)012-25(2B-Cnct)
÷
813/04, 3:42 PM
÷
[
To Next Page
Loading...
