A ÷ [
Adjustingthe picture
Selecting the picture mode
You can sdect 7our desired picture setth_gs from t_)ar picture
modes, as described beh)w.
Sports
Standard
Movie
Preference
Bright and dynamic picture (factory setting)
Standard picture settings (factory setting)
Lower contrast for darkened room (factory setting)
Your persona[ preferences
To select the picture mode:
Press PIC MODE on the remote
control The tblh)wing popup menu
appears on-screen.
Repeatedly press PIC MODE PIC
" MODE-
tO Q¢c_e among the modes.
O_D 0 0
To select the picture mode using the menu system:
1. Press MENU and open the VIDEO menu.
2, Highlight PICTURE SETTINGS andpress ENTER.
3. Press Y to highlight the bfODE field, and then 4 _ to
select the mode 7ou prefer.
4. To temporariI7 save the mode 7ou selected, highlight
DONE and press ENTER.
Note: Temporarily saved settings wiiI apply until the
s°,rce!Scha ged"........................
To permanentl 7 save the mode 7ou selected highlight
SAVE and press ENTER.
Note:
• Thepk;,turemodeyouselected/storthecurren_/nput
selectk)n only (ANT 7 /h ff?e e£afrlpb abovej You can select
a ci/_erent p/brute olode for each I}_putse/ect/on
, /fynusebctoneofthe_cto/ysetp/bturemodesfSPORTS,
STANDARD, of MOI//F) and then change a p/brute qua/£y
sett/hg (for exn/np/e, increase the cont/_ist of change the
color _mper_ture), the p/brute frlode automatically changes
_b PREFERENCE in the P/brute SetY/bgsmenu
Adjusting the picture quality
You can adjust the picture quafity (contrast, brightness, color,
tint, and sharpness) to your personal prefbrences.
To adjust the picture quality:
1_ Press MENU and open the VIDEO memt.
2. Highlight PICTURE SETTINGS and press ENTER.
3. Press _ or A to select the picture qualit 7 7oa want to adjust
(CONTRAST, BRIGHTNESS, COLOR, TINT, or
SHARPNESS), and then "_ and _ to adjust the setting, as
described in the taNe beh)xv
¢_Navigate _Select _&_Back _z_Exit
contrast lower higher
brightness darker lighter
color paler deepe_
tint reddish greenish
sharpness softer sharper
4_ To temporarily save the new settings, highlight DONE and
press ENTER. To permanently save the new settings,
highligh_ SAVE and press ENTER,
Note: 7q_esettingsj/ol; selectedare tot tile cu/rentinput selection
Of7/_/ (ANT 7b tl_eexampb above__u carsselectciifferent
settir-tgsfor eachklput selection
The picture qualities 7ou adjusted are automaticalI 7 saved in the
PREFERENCE nmde (see "Sdecting the picture mode," above
left).
Resetting the picture settings
To reset the picture settings to their factory values:
1, Highligh_ RESET in the Picture Seuings menu and press
ENTER.
2. HigNight SAVE and press ENTER.
Note: This resets tl_epictu/es seltings for the ctererff /nptJt sotJree o/7/}/
(ANT _b this exqrrrple),
÷
H94(E)077-83(8b-UseTV)
77
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
÷
813/04, 6:36 PM
77
[
To Next Page
Loading...
