A ÷ [
Adjusting the picture(co.ti..ed)
Using the Night Mode feature
The Night Mode fbature can be activated to reduce eye strain
when the room is dark.
To activate the Night Mode:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Press W to highlight the NIGHT MODE field, and then
press _" to select ON.
4. To temporarily save the new serungs, highlight DONE and
press ENTER,
To permanendy save the new settings, highligh_ SAVE and
press ENTER,
Note:
" WhentheNight Mode feaflJ/_is ON,the COIVTRASTseftmg
(_;)age77) is not ac/justabb
To deactivate the Night mode:
Selec_ OFF in s_ep 3 above.
Using CableCleaF DNR (digital
noise reduction}
The CableCIead _ dighaI noise reduction fbature aIlows 3x_uto
reduce visibIe in_erfbrence i*1your TV picture, This may be
usef:tll when receiving a broadcas_ with a weak signal (especially
a Cable channel) or pIaying back a video cassette or disc
damaged by repeated use.
NOTE: TheO_bleCle_ffDNR featurecloesilot funetk_s7is?
HDMI CDVI),A75"C;,IEEE 1394,and CJ/_'itldC2;hlefTIocJe_
To turn on CableClear DNR:
1. Press MENU and open the VIDEO menu.
2. Highlight ADVANCED PICTURE SETTINGS and press
ENTER.
3. Press T to highlight the CABLECLEAR DNR fidd, and
then press _ to seIectAUTO.
4. To temporarily save the new settings, highlight DONE and
press ENTER.
To permanendy save the new settings, highlight SAVE and
press ENTER.
NOTE:
• If the curl_ntinputisAntenna, Video 1 Video 2, or 1lib'co3,
the menu will display tl_e text '<CableCle_S
• ff_7}ecu_rentinputisCe/ofSt/enmHD7 orCebf_'t/enmHD2,
the menu w/2 cllsplaythe text "DNR"
• ff the culr_nt input/:_ HDMI or IEEE 7394 the menu wi//
d/_,_lg_ythe text "DN R" and will be "g/wed out" to indicate
that the feature does iTot ftJl_ction/rl t/7/sklptA
To mm off CableClear DNR:
Sdect OFF in step 3 above.
÷
78
H94(E)077-{ (8b-UseTV)
78
Copyright @ 2604 TOSHIBA CORPORATION. All rights reserved.
÷
813/04, 6:36 PM
[
To Next Page
Loading...
