A ÷ L
Using the volume lock feature (8000}
For the TV, CABLE/SAT, VCR, and DVD modes, the voIume
controls (VOL &/Y and MUTE) can be locked to the sdec_ed
device mode. This fba_ttredoes no_apply to the AUDIO 1 and
AUDIO 2 modes.
To lock the volume controls to always control the
CABLE/SAT device w*lum.e (for example):
1. Repeatedly press MODE to sdect CABLE/SAT mode.
2. While holding down the RECALL burton, press 8 - 0 - 0 - 0.
3. PressVOL &.
The CABLE/SAT mode ligh_ will blink two times docked).
To reset the w*lume controls to the original device mode:
1. While holding down RECALL, press 8 - 0 - 0 - 0.
2. PressVOL V.
The mode light will blink four times (*mlocked).
Operational feature reset (8900}
This tbature dears aIIseEuptbatures not rek*tedto "Device code
set tip" arid resets the Valttme Lock to "TV/'
To reseEthe features:
WhiIe hoIding down the RECALL button, press 8-9-0 - (t.
The Mode indicator will blink two times, and d_enpattse
and blink two more times.
-- POWER
-- Numbers
MODE
_VOLA/T
i RECALL
÷
H94(E)026-S3(S-RC)
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
÷
8/3/04, 3:55 PM
31
F
To Next Page
Loading...
