A ÷ L
SeJectingthe cinemamode
(48(_isignaJsonJy)
When you view a DVD (480i signal; 3:2 puHdowr_processed)
f}'oma DVD player coimec_ed to the ColorStream HD1/HD2
(component video) or HDMI irlpurs on the TV, smoother
motion can be obtained by se_fing the CINEMA MODE to
FILM.
To set the CINEMA MODE to FILM=
1. Press MENU and open the VIDEO maim.
2. Highlight THEATER SETTINGS and press ENTER.
3. In the CINEMA MODE fidd, sdect FILM.
Picture Size _
i }< 0 xs
Cinema Mode
Di@lay Format
Auto A_pect Ratio
4_
To save your seekingstemporariIy, highlight DONE and
press ENTER.
To save your servings permanentl> highligh_ SAVE and
press ENTER.
To set the CINEMA MODE to VIDEO:
Select VIDE() in step 3 above.
Picture Size
Oinema Mode
DisplayFormat
AutoAspe_Ratio
SeJectingthe dispJay format
{480i and 480p signaJs enJy)
You can use this fba_ureto convert a 480p input signal to 540p
or 10801.
To select the display forma=
1. Press MENU and open the VIDEO menu.
2. Highlight THEATER SETTINGS and press ENTER.
3. In the DISPLAY FORMAT fidd, sdect either 540p or
1o8oi.
Cinema Mode
Display Format _
4. To save }_ourso,rings temporarily, highlight DONE and
press ENTER.
To save }_ourse_ringspermanendy, highlight SAVE and
press ENTER.
Note:
* /llptJt SI_'IV_/Sother _hFID4801 or 480/2 #_[_#)tJtOFltFItlt'R//yCOI'IVP_F_@d_0
1080/]
* ffyou/lot/be flicker/b a 480p/Xnage, t/y sett/bg the D/SPLAY FORMAT
_b 540p
÷
H94(E)O67-76(8a-UseTV)
73
Copyright @ 2004 TOSHIBA CORPORATION, All rights reserved,
÷
813/04, 6:09 PM
73
r