A ÷ L
The LOCKS meplu includes the RATING BLOCKING, CHANNELS BLOCK, INPUT LOCK, FRONT PANEL LOCK,
GAITfETIITfER, and NEW PIN CODE fbatures. You can use these fbatures af'_erentering the correct PIN code.
Enteringthe PiN cede
1. Press bfENU and higNighr the LOCKS memt icon.
_Navigate _Select l_._Zt_Back _z_ExJt
2. Press Y, whid_ displays the PIN code entry screen.
, The LOCK SYSTEM screen (bdow) appears ira PIN code
has nor been stored, Press the Channel Number buttons to
enter a new fbur-digit code, enter the code a second time to
confirm, and press ENTER,
, The LOCKS ACTIVE screen (bdow) appears if'tI_e PIN
code is akeady stored, Press the Charred Number buttons
to enter your four-digit code and press ENTER,
If the wrong PIN code is entered, the message "Incorrect PIN
code" appears. HigNight RETRY and press ENTER, Enter the
code again and press ENTER,
When the correct PIN code is entered, the LOCKS memt
opens.
_JNavigate _@Select _Back _#_Exit
if yeacannotrememberyear
PiNcede
While the PIN code enterip_gscreen is displayed, press RECALL
f_.>urtimes within fi_e seconds. The PIN code will be reset and
you can enter a new PIN code,
ChangingyearPiNcede
1. Press MENU and higNigh_ the LOCKS menu icon.
2. Press Y to display the PIN code entering screen.
3. Enter your f'ou>digit PIN code and press ENTER,
4. Press Y to highlight NEW PIN CODE and press ENTER,
5. Press the Number buttons to enter a plowfbur-digit code,
Reupe the pmmbers to confirm the PIN code 3x_uentered.
6. Press ENTER, The new PIN code is now active.
¢_Navigate @8oloot _L_F_TL_Back _Je_E×it
÷
88
H94(E)0884 1 (9-Locks)
88
Copyright @ 2604 TOSHIBA CORPORAIlON. All rights reserved.
÷
813/04, 6:46 PM
r