Toshiba B-EX4 SERIES - Page 8

1. OUTLINE EO10-33024
1.4 BASIC SPECIFICATIONS
1- 6
(3)Cutter mechanism
When the cutter module is installed, the backing paper of the label stock or tag paper is cut
individually.
Disk cutter: Stop and cut
Rotary cutter: Non stop cut
Item Specification
Cutter type DISK CUTTER ROTARY CUTTER
Paper width 30.0mm - 25.0 - 120.0mm
3”/sec 30.0 - 1500mm(T.B.D)
Tag
25.4- 500mm
(T.B.D)
6”/sec 30.0 - 1500mm
(T.B.D)
No Head-
up
Head-up
3”/sec
94.0 -
1500mm
38.0 -
1500mm
Cut
length
Label
38.0 - 1500mm
(T.B.D)
6”/sec
106.0 -
1500mm
38.0 -
1500mm
Possible
cut size
Thickness 80 - 170µm
(T.B.D)
Cutter life 1,000,000 cut (160µm tag) (T.B.D)
*Cutterlifeisconfirmedbyusingsamewidthpaper.
DiskCutter：17.8
RotaryCutter:77.1