1. OUTLINE SPTM-0152
1.4 BASIC SPECIFICATIONS
1-7
(3) Cutter mechanism
When the cutter module is installed, the backing paper of the label stock or tag paper is cut
individually.
Disk cutter: Stop and cut
Item Specification
Cutter type DISK CUTTER
Paper width 30.0mm -
Tag
25.4- 500mm
(T.B.D)
Cut
length
Label
38.0 - 1500mm
(T.B.D)
Possible
cut size
Thickness 80 - 170μm(T.B.D)
Cutter life 1,000,000 cut (160μm tag) (T.B.D)
* Cutter life is confirmed by using same width paper.
Disk Cutter:21.9
To Next Page
Loading...
