Toshiba B-FV4D-GL Series User Manual

APPENDIX 1 SPECIFICATIONS ENGLISH VERSION EO1-33099
A1.2 Media
EA1-2
A1.2 Media
Please make sure that the media to be used is approved by TOSHIBA TEC CORPORATION. The warranties do
not apply to problems caused by using media that is not approved by TOSHIBA TEC CORPORATION.
For information regarding TOSHIBA TEC CORPORATION-approved media, please contact a TOSHIBA TEC
CORPORATION authorised representative.
A1.2.1 Media Type
The table below shows the size and shape of the media that can be used on this printer.
Unit: mm (inch)
Issue mode
Item
Cut mode
 Label width
102mm (4.0”)
 Cut length
25.4mm to 152.4mm (1.0” to 6”)
Thickness
0.06mm to 0.19mm (0.0024” to 0.0075”)
Max. outer roll diameter
Ø127mm (5”)
Roll direction
Outside wound
Inner core diameter
40mm (1.57”)
NOTES:
1. To ensure print quality and print head life use only TOSHIBA TEC CORPORATION approved media.
2. A label jam is more likely to occur with the approach of label end because labels around the paper core curl
intensely.

Feed Direction
Cut
position
Label


Toshiba B-FV4D-GL Series Specifications

General

Brand	Toshiba
Model	B-FV4D-GL Series
Category	Barcode Reader
Language	English