1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33099
1.1 Introduction
E1- 1
1. PRODUCT OVERVIEW
1.1 Introduction
1.2 Features
1.3 Unpacking
1.4 Accessories
Thank you for choosing the TOSHIBA B-FV4D-GL series barcode
printer. This Owner’s Manual contains valuable information from general
set-up to confirming the printer's operation using test prints. You should
read it carefully to help you gain maximum performance and life from
your printer. This manual should be kept close at hand for everyday
reference.
Please contact your TOSHIBA TEC CORPORATION representative for
further information concerning this manual.
This printer has the following features:
Interfaces
The printer comes fitted with the following interfaces:
•USB interface
•Ethernet interface
•Serial (RS232) interface
Easy to use
The printer mechanism is designed to allow easy operation and easy
access for maintenance.
1. Unpack the printer.
2. Check for damage or scratches on the printer. However, please note
that TOSHIBA TEC CORPORATION shall have no liability for any
damage of any kind sustained during transportation of the product.
3. Keep the carton and internal packaging for future transportation of the
printer.
When unpacking the printer, please check that the following accessories
are supplied with the printer.
CD-ROM (1 copy)
Quick Installation Manual (1 copy)
Safety Precautions (1 copy)
USB Cable (1 pc.)
Scraper (1 pc.)
Cleaner Pen (1 pc.)
Cutter Tray (1 pc.)
To Next Page
Loading...
Need help?
General
