1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33099
1.4 Accessories
E1- 2
When you need to purchase a power cord
In some countries/regions the power cord is not provided with this unit, if this is the case then please purchase
an approved one that meets the following standards or contact your authorised TOSHIBA TEC
CORPORATION representative.
(As of Oct. 2014)
1. For use with 100 – 125 Vac mains power supply, please select a power cord rated Min. 125V, 10A.
2. For use with 200 – 240 Vac mains power supply, please select a power cord rated Min. 250V.
3. Please select a power cord with the length of 2m or less.
4. The power cord plug connected to the AC power inlet must be able to be inserted into an ICE-320-C14 inlet. Refer to
the following figure for the shape.
Power Cord
Rated (Min.)
Type
Conductor size
(Min.)
125V, 10A
SVT
No. 3/18AWG
250V
H05VV-F
3 x 0.75 mm
2
250V
H05VV-F
3 x 0.75 mm
2
250V
AS3191 approved,
Light or Ordinary Duty type
3 x 0.75 mm
2
Plug Configuration
(locally approved
type)
Rated (Min.)
*1: At least, 125% of the rated current of the product.
To Next Page
Loading...
Need help?
General
