Toshiba B-SA4T Series - Basic Specifications

1. OUTLINE EO10-33016A
1.4 Basic Specifications
1- 3
1.4 Basic Specifications
1) Printing method: Thermal direct printing or thermal transfer printing
2) Print head
GS12 model TS12 model
Total number of dots 832 dots 1248 dots
Dot density 8 dots/mm 11.8 dots/mm
Effective print width 104 mm 105.7 mm
Thermal pitch 0.125 mm 0.0847 mm
3) Print speed: 6”/sec., 4”/sec., 2”/sec.
NOTE: These print speeds are available when printing ratio is less than 30% of the entire label or tag paper.
4) Format size (W) x (L)
GS12 model: Max. 104.0 mm x 997.0 mm
TS12 model: Max. 105.7 mm x 997.0 mm
5) Issue mode
• Batch
• Auto cut (Auto cut mode is available only when the optional cutter is attached.)
• Strip (Strip mode is available only when the optional strip module is attached.)
6) Type of bar code/two dimensional code
(1) JAN8, EAN8, JAN13, EAN13, UPC-A, UPC-E
(15)
Industrial 2 of 5
(2) EAN8, EAN13, UPC-A, UPC-E + 2digit (16)
Customer Bar Code
(3) EAN8, EAN13, UPC-A, UPC-E + 5digit Postal code for Japan)
(4)
NW-7
(17)
POSTNET (Postal code for USA)
(5)
CODE39 (STANDARD)
(18)
RM4SCC (Postal code for UK)
(6)
CODE39 (FULL ASCII)
(Royal Mail 4 State Customer Code)
(7)
ITF
(19)
KIX CODE (Postal code for Belgium)
(8)
MSI
(20)
Maxi Code
(9) CODE93 (21)
Micro PDF417
(10)
CODE128 (Automatic code change) (22)
CP CODE
(11)
EAN128
(23)
RSS14
(12)
Data Matrix (24)
High priority customer bar code
(13)
PDF417 (25)
GTIN (Global Trade Item Number)
(14)
QR Code
7) Bar code rotation: 0
°, 90°, 180°, 270°