e-STUDIO200L/202L/230/232/280/282 GENERAL OPERATION June 2004 © TOSHIBA TEC
4 - 8
• When the power is turned ON or the LCF drawer is inserted (when the power is turned ON or
equipment drawer / PFP drawers are inserted), LCF (PFP/equipment) performs initialization.
"
Detects the presence of paper
Tray-up motor ON – The tray goes up
$
At this time, the tray-up sensor and empty sensor are OFF.
When the tray-up sensor is not turned ON in a fixed period of time, it means that
the tray is in abnormal condition.
$ “Add paper” is displayed regardless of presence/absence of paper.
$ Cleared by turning the power ON/OFF
$ Tray-up sensor is turned ON in a fixed period of time.
- The tray motor stops.
At this time, if the empty sensor is ON: It is judged that there is paper.
OFF: It is judged that there is no paper.
"
Drawer area of the LCD panel blinks (When the drawer is selected)
• When the paper in the drawer runs out during copying,
$ The tray-up sensor turned OFF
$ The tray-up motor turned ON
$
Tray goes up
The tray-up sensor turned ON
$
Tray-up motor stopped.
• Empty sensor turned OFF during the copying in spite of the tray-up sensor is ON
"
It is judged that there is no paper.
"
Drawer area of the LCD panel blinks (When the drawer is selected)
"
The copying operation is stopped.
To Next Page
Loading...
