5
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 CONTROL PANEL
5 - 17
[B] Control panel unit
(1) Take off the front upper cover, right upper
cover-1 and right upper cover-2
(! P.2-32 "[E] Front upper cover", ! P.2-33
"[F] Right upper cover-1", ! P.2-33 "[G]
Right upper cover-2").
(2) Disconnect 1 connector.
(3) Remove 2 screws and 2 harness clamps.
Then release the harness from 3 harness
clamps.
Fig. 5-11
(4) Lower the control panel unit and remove 4
screws.
(5) Take off the control panel unit while sliding it.
Fig. 5-12
Control panel
unit
05/11
To Next Page
Loading...
