e-STUDIO200L/202L/230/232/280/282 CONTROL PANEL June 2004 © TOSHIBA TEC
5 - 18
[C] Display PC board (DSP board)/Key control PC board (KEY board)/LCD
[C-1] e-STUDIO200L/230/230L/280/280S
(1) Take off the control panel unit
(! P.5-17 "[B] Control panel unit").
(2) Remove 3 screws and take off the cover.
Fig. 5-13
(3) Remove 5 screws and take off the hinge
bracket.
Fig. 5-14
(4) Disconnect 5 connectors and remove 1 har-
ness clamp. Then take off the DSP board.
Fig. 5-15
Cover
Hinge bracket
DSP board
05/11
To Next Page
Loading...
