e-STUDIO200L/202L/230/232/280/282 DEVELOPMENT SYSTEM June 2004 © TOSHIBA TEC
12 - 18
(5) Remove 2 bushings and 2 oil seals from the
holder.
(Replacement of Oil Seal: ! P.12-20 "[I]
Replacement of Oil Seal")
Fig.12-32
(6) Take off the mixers-2 and -3.
Fig.12-33
(7) Remove 2 bushings and 2 oil seals on the
rear side.
(Replacement of Oil Seal: ! P.12-20 "[I]
Replacement of Oil Seal"
Fig.12-34
Oil seal
Bushing
Mixer-3
Mixer-2
Oil seal
Bushing
To Next Page
Loading...
