e-STUDIO200L/202L/230/232/280/282 OUTLINE OF THE MACHINE June 2004 © TOSHIBA TEC
2 - 42
[A-2] e-STUDIO202L/232/232S/282/282S
(4) Loosen 5 screws, disconnect 2 connectors
and take off the SYS board upper cover.
Fig. 2-46
(5) Remove 4 screws and take off the HDD from
the SYS board upper cover.
Fig. 2-47
(1) Take off the rear cover (! P.2-31 "[C] Rear
cover").
(2) Loosen 4 screws and take off the bridge
bracket.
Fig. 2-48
SYS board
upper cover
HDD
SYS board
upper cover
Bridge bracket
05/11
To Next Page
Loading...
