Toshiba e-studio 202L - Page 77

2
June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 OUTLINE OF THE MACHINE
2 - 43
(3) Disconnect 1 connector.
Fig. 2-49
(4) Loosen 11 screws and take off the SYS
board cover.
Fig. 2-50
(5) Remove 4 screws. Disconnect 2 connectors
while removing the HDD with the bracket.
Fig. 2-51
SYS board cover
HDD
05/11