e-STUDIO166/206 © February 2007 TOSHIBA TEC CORPORATION All rights reserved
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 2
Copy speed for thick paper (Copies/min.)
e-STUDIO166/206
Thick 1 (81 g/m
2
to 105 g/m
2
, 21.3 lb. Bond to 28 lb. Bond): Bypass feed on a sheet by sheet basis only
Thick 2 (106 g/m
2
to 163 g/m
2
, 28 lb. Bond to 90 lb. Index): Bypass feed on a sheet by sheet basis only
!Copy paper
!First copy time ..................... Approx. 7.6 sec. (A4, 100%, original placed manually)
Approx. 7.7 sec. (LT, 100%, original placed manually)
!Warming-up time.................. Approx. 25 sec. (temperature: 20°C)
!Multiple copying ................... Up to 999 copies; Key in set numbers
!Reproduction ratio ............... Actual ratio: 100±0.5%
Zooming: 25 to 200% in increments of 1%
!Resolution/Gradation ........... Scanning: 600 dpi x 600 dpi
Printing: Equivalent to 2400 dpi x 600 dpi
Gradation: 256 steps
!Eliminated portion ................ Leading edges: 3.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (copy)
Leading / trailing edges: 5.0±2.0 mm, Side edges: 5.0±2.0 mm (print)
Paper feeding ......................... Standard drawer:
1 drawer (stack height 28 mm, equivalent to 250 sheets; 64 to
80 g/m
2
(17 to 22 lb. Bond))
Bypass feeding:
Stack height 11.8 mm: equivalent to 100 sheets; 64 to 80 g/m
2
(17 to 22 lb. Bond)
Paper Feed Unit (PFU):
Option (One drawer: stack height 28 mm, equivalent to 250
sheets; 64 to 80 g/m
2
(17 to 22 lb. Bond))
Capacity of originals in the automatic document feeder (Option)
.................................................. A3 to A5-R, LD to ST-R:
100 sheets / 80 g/m
2
(Stack height 16 mm or less)
Toner supply ........................... Automatic toner density detection/supply
Toner cartridge replacing method (There is a recovered toner supply
mechanism.)
Drawer PFU Bypass copy Remarks
Size A3, A4, A4-R, B4, B5,
B5-R, LD, LG, LT, LT-R,
FOLIO, COMPUTER,
13"LG, 8.5" x 8.5", 8K,
16K, 16K-R
A3 to A5-R, LD to ST-R, FOLIO, COM-
PUTER, 13"LG, 8.5" x 8.5", 8K, 16K,
16K-R
(Non-standard or user-specified sizes
can be set.)
Weight
64 to 80 g/m
2
50 to 163 g/m
2
(Single paper feeding)
64 to 80 g/m
2
(Continuous feeding)
Special
paper
– Tracing paper, labels, OHP film
(thickness: 80 µm or thicker),
These special papers rec-
ommended by Toshiba Tec
To Next Page
Loading...
