2. Installing Client Software
128 Printing Guide — Installing Client Software for Windows
1. Open the NetWare queue for the equipment in the network
with Windows Explorer, and double-click a queue.
When the NetWare has been set up for the Bindery mode, open the NetWare file
server and double-click the queue for the equipment.
When the NetWare has been set up for the NDS or NDPS mode, browse the
NDS tree and context, and double-click the queue for the equipment.
• The Printers dialog box appears.
2. Click [Yes].
• When using the NetWare in NDPS mode and the printer drivers for each
Operating System are installed to a NDPS broker, the printer driver is auto-
matically installed.
• Unless using the NetWare in NDPS mode and printer drivers for each Oper-
ating System are installed to a NDPS broker, the Add Printer Wizard dialog
box appears. Continue to the next step.
3. Click [OK].
To Next Page
Loading...
