2. Installing Client Software
Printing Guide — Installing Client Software for Windows 35
11. Click [Finish].
• The installation is completed.
NOTE: Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
P.194 "Before Using the Printer Driver"
— Windows 2000
Installing the printer driver for parallel printing by Plug and Play
NOTE: You must log into Windows as a user who has the “Administrators” or “Power Users”
privilege when using Windows 2000.
1. Connect the printer cable to this equipment and your com-
puter, and then power on the equipment and your computer.
• The Found New Hardware Wizard dialog box appears.
2. Click [Next].
To Next Page
Loading...
