2. Installing Client Software
Printing Guide — Installing Client Software for UNIX 183
8. Enter the following command:
service cups start
9. Enter the following command:
/usr/bin/cupsconfig
• The Common UNIX Printing System page appears. Skip to step 11.
10. Open the browser and locate CUPS by typing
“http://local host:631/” in the address field.
• The Common UNIX Printing System page appears.
NOTE: When IPP/SSL is enabled, specify “http://local host:433/” in the address field to access
the Common UNIX Printing System.
11. Add a new https printer by clicking [Add Printer].
Configure the parameters as:
Name: <Any Name>
Location: <Optional>
Description: <Optional>
Device: Internet Printing Protocol (http)
Device URL: http://<IP address>:631/Print
Model/Driver: TOSHIBA
NOTE: When IPP/SSL is enabled, specify as followings:
- Device: Internet Printing Protocol (https)
- Device URL: https://<IP address>:433/Print
SUPPLEMENT: Using CUPS Client (print commands lp, lpr, etc.) with -e option, the connection can be
encrypted and printing can be done in the above configured printer.
— Modifying or Configuring Printer
You can modify or configure the printer that you create.
Modifying Printer
You can change the location and description of the printer.
To Next Page
Loading...
