Toshiba E-studio 281c - Using the Discovery Functions to Specify the SMB Port

2. Installing Client Software
Printing Guide — Installing Client Software for Windows 91
15. The installation is completed.
NOTE: Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
 P.194 "Before Using the Printer Driver"
— Using the Discovery Functions to Specify the SMB Port
In the Select Port screen during the installation, you can also obtain the network queue
name automatically by searching the equipment.
There two ways to obtain the SMB printer port from the equipment:
 P.91 "Searching the equipment automatically"
 P.93 "Specifying the IP address manually"
Searching the equipment automatically
1. Click [Discovery].
• The TopAccessDocMon Local Discovery dialog box appears.
2. Click [Start Discovery].
• It starts searching the equipment in the network.