2. Installing Client Software
Printing Guide — Installing Client Software for Macintosh 155
Configuring Macintosh AppleTalk printing
NOTE: Before installing the printer driver for AppleTalk printing on Macintosh, check with your
system administrator to make sure of the following:
- This equipment is connected to the network and turned on.
- The AppleTalk settings is correct.
1. Click Apple menu and select [Chooser].
• The Chooser dialog box appears.
2. Select the LaserWriter 8 icon (and select the AppleTalk zone
if configured). Then select this equipment displayed in the
list, and click [Create].
• The Select a PostScript Printer Description File dialog box appears.
3. Select the PPD file (TOSHIBA_e-STUDIO451cSeries) for the
equipment and click [Select].
To Next Page
Loading...
