2. Installing Client Software
178 Printing Guide — Installing Client Software for UNIX
3. Copy the GZIP file into the “usr/share/cups/model/Toshiba”
directory or enter the following command:
cp TOSHIBA_EST451c_CUPS.gz /usr/share/cups/model/Toshiba
• A GZIP file is included in the “Admin/CUPS/USA” folder in the CD-ROM.
4. Enter the following command:
service lpd stop
NOTE: If lpd is already stopped, “Failed” will be displayed.
• When using the Red Hat Linux, continue to the next step.
• When using other than the Red Hat Linux, skip to step 10.
5. When using the Red Hat Linux, enter the following com-
mand:
/usr/bin/redhat-switch-printer
• The redhat-switch-printer dialog box appears.
6. Select “CUPS” and click [OK].
• The information dialog box appears.
7. Click [OK].
8. Enter the following command:
service cups start
9. Enter the following command:
/usr/bin/cupsconfig
• The Common UNIX Printing System page appears. Skip to step 11.
10. Open the browser and locate CUPS by typing
“http://local host:631/” in the address field.
• The Common UNIX Printing System page appears.
11. Click the “Manage Printers” link.
• The Printer page is displayed.
To Next Page
Loading...
