3. Printing
Printing Guide — Printing from Windows 217
SUPPLEMENT: How the equipment performs printing for an invalid department code print job, which no
department code or invalid department code is specified, varies depending on the
Department Code Enforcement setting that can be set from TopAccess Administrator
mode and whether the SNMP Communication is enabled or not. When the SNMP
Communication is enabled and Department Code Enforcement is set to “ON”, an error
message will be displayed when entering the invalid department code. When the
SNMP Communication is disabled and Department Code Enforcement is set to “ON”,
the invalid department code print job will be stored in the invalid department code print
job list without printing. When the Department Code Enforcement is “Print”, the invalid
department code print job will be printed. When the Department Code Enforcement is
“Delete”, the invalid department code print job will be deleted without printing.
However, when using Windows NT 4.0 and configure the connection through a Net-
Ware print server, an error message for entering the invalid department code will not be
displayed even if the Department Code Enforcement setting and SNMP Communica-
tion is enabled.
To Next Page
Loading...
