3. Printing
272 Printing Guide — Printing from Macintosh
- Lower Right (Portrait)/Lower Left (Landscape) — Select this to staple in the
lower right for the portrait document, or in the lower left for the landscape docu-
ment.
- Middle Top (Portrait)/Middle Right (Landscape) — Select this to staple dou-
ble in the top for the portrait document, or in the right for the landscape docu-
ment.
- Middle Bottom (Portrait)/Middle Left (Landscape) — Select this to staple
double in the bottom for the portrait document, or in the left for the landscape
document.
- Saddle Stitch (Portrait)/Saddle Stitch (Landscape) — Select this to staple
double in the center for a booklet to be printed. Select this only when booklet
printing is performed.
NOTES: • This option cannot be selected if a finisher is not installed.
• “Saddle Stitch (Portrait)/Saddle Stitch (Landscape)” is displayed when you select
“Multi-position Stapler” or “Multi-position Stapler and Hole Punch” is selected in the
Installable Options settings during the installation. However, this option is available
only when the Saddle-stitch Finisher is installed.
To Next Page
Loading...
