4. Monitoring Print Jobs
324 Printing Guide — Monitoring Print Jobs with TopAccessDocMon
2. Click [Start Discovery] to begin the process.
• TopAccessDocMon locates the compatible printers in your network.
SUPPLEMENTS: • You can quit the process by clicking [Stop Discovery].
• It may not find the device that is located in the different segment. If a device cannot
be found, find a device manually from the [Manual Selection] button.
P.325 "Finding a printer by entering printer address manually"
• If the process continues for a long time, it is because too many network clients are in
the network. Also, you must change the discover settings if you want to search for a
printer in the IPX/SPX network. In these cases, please configure the discovery set-
tings using the [Advanced] button.
P.327 "Configuring Discovery Settings"
NOTE: When the equipment is connected to the IPX/SPX network of the NDS or NDPS envi-
ronment, the equipment cannot be discovered on Windows 98/Me. In this case, please
configure the connection manually.
P.325 "Finding a printer by entering printer address manually"
3. When the process is complete, the printers that have been
found are listed in the list.
To Next Page
Loading...
