2. Installing Client Software
94 Printing Guide — Installing Client Software for Windows
2. Click [Manual Selection].
• The Manual Selection dialog box appears.
3. Enter each item to specify the printer address and click [OK].
IP Address — Enter the IP address of the printer.
IPX Address — Enter the IPX address of the printer. This is available only
when the IPX/SPX protocol and Novell Client are installed in your computer, and
the computer is connected to the NetWare server.
Name — Enter the printer name.
Location — Enter the location of the printer.
NOTE: You must enter “Name” and either “IP Address” or “IPX Address”.
To Next Page
Loading...
