EasyManua.ls Logo

Toshiba e-Studio 350 - Setting up Netware Print Server; Setting up the Netware in Bindery Mode; Editing the Network Startup File; Setting up the Netware File Server

Toshiba e-Studio 350
222 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network Administrator’s Guide — Setting up NetWare Print Server 171
Setting up NetWare Print Server
This equipment supports the following Novell printing services:
NetWare 4.x bindery emulation mode
NetWare 4.x NDS mode
NetWare 5.x and 6.x NDS mode (over IPX/SPX only)
NetWare 5.x and 6.x NDPS mode
This chapter provides an overview of how to set up this equipment as a Novell Network Printer,
Print Server, or NDPS Printer Agent. For more detailed information, refer to your Novell docu-
mentation.
Setting up the NetWare in Bindery Mode
You can connect only one directory tree to this equipment. If you need to connect additional Net-
Ware 4.x servers, do so by using bindery emulation, which causes the 4.x server to behave like,
and be accepted as, a NetWare 3.x server.
NOTE:
The file server selected must not be in the same tree as that selected in NDS Setup.
In order to set up the NetWare 4.x server in bindery emulation mode for printing to this equip-
ment, the network administrator must do the following:
Edit the network startup file to set the bindery context.
P.171 "Editing the Network Startup File"
Configure the print queues, print server, and printer on the file server.
P.171 "Setting up the NetWare File Server"
Editing the Network Startup File
The following procedures explain how to edit the bindery contexts in the network startup file.
Editing the bindery context
1. On NetWare file server, enter “load install” and press the
[Enter] key.
2. Select [NCF Files Options] from the menu.
3. Select [Edit AUTOEXEC.NCF] from the menu.
4. Search for the file to see if you have a statement similar to the
following included:
SET BINDERY CONTEXT=0U=ENG
If the statement above can be found in the file, the server has a bind-
ery. If this is not found, enter the statement above and save the file.
5. Restart the NetWare file server.
Setting up the NetWare File Server
The following explains how to set up a NetWare 4.x file server with bindery emulation so that
network users can print to this equipment from their computers, and this equipment can obtain
print jobs from the NetWare server.

Table of Contents

Other manuals for Toshiba e-Studio 350

Related product manuals