Toshiba e-Studio 350 - Setting up Device Settings

48 Network Administrator’s Guide — Setting up Device Settings
Setting up Device Settings
In the General submenu page in the Setup menu, an administrator can configure the general set-
tings such as Device Information, Energy Save, Date and Time, and Web General Setting.
NOTE:
• Some settings may not apply to the Touch Panel Display as soon as you save the
settings. When you change the settings, press the [RESET] button on the Control
Panel before an operation.
Setting the device settings
1. Access TopAccess in the administrator mode.
 P.15 "Accessing TopAccess Administrator Mode"
2. Click the Setup menu and General submenu.
• The General submenu page is displayed.
3. In the General submenu page, set the device settings as
required.
• In the General submenu page, you can set the following:
 P.49 "Setting up the Device Information"
 P.50 "Setting up the Energy Save"
 P.50 "Setting up the Time and Date"
 P.51 "Setting up the Web General Setting"
4. Click [Save].
• The confirmation dialog box appears.