Network Administrator’s Guide — Setting up NetWare Print Server 183
3. Click [Finish].
4. To confirm your choice, click [Yes].
When the update is complete, proceed to “Select Drivers” on page 183.
Select Drivers
After you create a Printer Agent, configure the options. When the update completes, the Select
Printer Drivers dialog box opens:
1. Select the appropriate operating system tab.
2. Select the printer drivers to be automatically downloaded to
users’ workstations when they select the new Printer Agent.
3. Select all desired drivers and then click [Continue].
A message box opens, listing the selected drivers:
4. Click [OK] if the selections are correct or click [Cancel] to
return to the Select Printer Drivers dialog and modify your
selections.
NDPS Printer Agent setup is complete. The new Printer Agent now appears in
the list of NDPS objects.
— Removing NDPS Components
1. Use the NWADMIN utility to delete all TOSHIBA NDPS printer
and print agents you created.
To Next Page
Loading...
