Toshiba e-Studio 350 - Setting up the FTP Client; Setting up the FTP Server

62 Network Administrator’s Guide — Setting up Network Settings
Setting up the FTP Client
In FTP Client, you can specify the default port number used for the Save as file using the FTP
protocol.
1) Default Port Number
Enter the port number to access the FTP site. The port number depends on the port setting in
the FTP site. Generally “21” is used.
Setting up the FTP Server
In FTP Server, you can enable or disable the FTP server functions.
1) Enable FTP Server
Select whether the FTP server is enabled or disabled. Select Enable to enable the reading/
writing the address book data using the Address Book Viewer.
2) Default Port Number
Enter the port number for the FTP server. Generally “21” is used.
1
1
2