Network Administrator’s Guide — Troubleshooting Overview 189
Peer-to-Peer Printing in a Windows Operating System Environment:
LPR Printing in a Windows Operating System Environment:
4 Is the WINS server address
correctly set?
Next Step
Ø
Ö
Setup the WINS server address
correctly, or enter “0.0.0.0” for
the WINS server address to dis-
able the WINS service.
P.57 "Setting up the SMB
Session"
5 If the client computers are
located in different seg-
ments, is the WINS service
correctly provided?
Next Step
Ø
Ö
Setup the WINS server and
enable it on this equipment to
allow users access from different
segment.
P.57 "Setting up the SMB
Session"
6 Can you see this equipment
in Windows Network Neigh-
borhood?
Next Step
Ø
Ö
Refer to following section to
troubleshoot the condition.
P.204 "Cannot See This
Equipment"
7 Were the proper printer driv-
ers installed?
Next Step
Ø
Ö
See the Printing Guide to install
proper printer drivers.
8 Is the driver’s port name
valid?
Next Step
Ø
Ö
See the Printing Guide to config-
ure proper port.
9 Can you print to this equip-
ment?
End Ö
Refer to following section to
troubleshoot the condition.
P.205 "Cannot Print To This
Equipment"
No Check... Yes No For Instruction, Go To...
1 Are the IP Address properties
correctly set?
Next Step
Ø
Ö
Setup the IP address correctly.
P.53 "Setting up the TCP/IP"
2 Were the proper printer driv-
ers installed?
Next Step
Ø
Ö
See the Printing Guide to install
proper printer drivers.
3 Is the driver’s port name
valid?
Next Step
Ø
Ö
See the Printing Guide to config-
ure the proper port.
4 Can you print to this equip-
ment?
End Ö
Refer to following section to
troubleshoot the condition.
P.205 "Cannot Print To This
Equipment"
No Check... Yes No For Instruction, Go To...
1 Are the IP Address properties
correctly set?
Next Step
Ø
Ö
Setup the IP address correctly.
P.53 "Setting up the TCP/IP"
No Check... Yes No For Instruction, Go To...
To Next Page
Loading...
