FC-22 SUPPLIES 3 - 4 January 2000 © TOSHIBA TEC
3.6 Checking and Replacing the Transfer Belt
(1) Handling Precautions
Do not touch the belt surface with your bare hands.
Prevent oil or other foreign matter from staining the belt surface.
Do not allow alcohol or any other organic solvent to come into contact with the transfer belt.
Do not apply external pressure that might scratch the transfer belt.
3.7 Checking and Replacing the Transfer Roller
(1) Handling Precautions
Do not touch the transfer roller surface with your bare hands.
Be carefull not to leave any scratch or dent on the transfer roller surface.
To Next Page
Loading...
