FC-22 TROUBLESHOOTING 4 - 12 January 2000 © TOSHIBA TEC
4.1.7 Paper jam in the sorter
EA1 Paper transport delay jam
Is there any bur, scratch or foreign matter on the paper transport path?
Remove any bur, scratch or foreign matter.
Is the transport roller stained?
Clean the transport roller.
Are both non-sort paper sensor (PI4) and sort paper sensor (PI5) working normally?
Replace any faulty sensor.
Replace the sorter controller PC board.
EA2 Paper transport stop jam
Is there any bur, scratch or foreign matter on the paper transport path?
Remove any bur, scratch or foreign matter.
Is the transport roller stained?
Clean the transport roller.
Are both non-sort paper sensor (PI4) and sort paper sensor (PI5) working normally?
Replace any faulty sensor.
Replace the sorter controller PC board.
YES
NO
▼
▼
YES
NO
▼
▼
NO
YES
▼
▼
YES
NO
▼
▼
YES
NO
▼
▼
YES
NO
▼
▼
To Next Page
Loading...
