Toshiba FC-22 - Paper Misfeed from the LCF

FC-22 TROUBLESHOOTING 4 - 4 January 2000 © TOSHIBA TEC
E13 Paper misfeed from the 1st cassette
E14 Paper misfeed from the 2nd cassette
E15 Paper misfeed from the 3rd cassette
E16 Paper misfeed from the 4th cassette
Open the side door; does any paper remain in the paper path from the cassette?
Remove the paper.
Is the harness between the LGC board and the cassette-feed jam sensor open-circuited?
Is the cassette-feed jam sensor connector or the connector J107 on the LGC board discon-
nected?
Reconnect the connector. Replace the harness.
1. Replace the cassette-feed jam sensor.
2. Replace the LGC board.
E19 Paper misfeed from the LCF
Open the side door; does any paper remain in the paper path from the LCF?
Remove the paper.
Is the harness between the LGC board and the cassette-feed jam sensor open-circuited?
Is the cassette-feed jam sensor connector or the connector J107 on the LGC board discon-
nected?
Reconnect the connector. Replace the harness.
1. Replace the cassette-feed jam sensor.
2. Replace the LGC board.
NO
▼
YES
▼
NO
▼
YES
▼
NO
▼
YES
▼
NO
▼
YES
▼