13
Chapter 2
Installation and Wiring
This chapter describes installation and wiring methods of the PA912 module.
Before installation and wiring, read this operation manual thoroughly.
2.1 Types of I/O Base Units
······················································· 16
2.2 Installing the Module
······························································ 17
2.2.1 Vertical installation of the module ··································· 17
2.2.2 Horizontal installation of the module ······························· 20
2.3 Connecting the TC-net I/O Loop Transmission
Connector
················································································· 21
2.4 Connecting the PROFIBUS Transmission Connectors ·
23
2.5 Replacing the Module
···························································· 24
2.6 Removing the Base Unit
······················································· 26
To Next Page
Loading...
