Chapter 2 Installation and Wiring
6F8C1259
WARNING
Before installing or removing the module,
make sure that the I/O base unit to which
the PA912 module is installed is turned off.
Otherwise, it may cause an electric shock.
Mandatory
WARNING
Do not touch the interior of the product
except the switches.
It may cause an electric shock.
Prohibited
CAUTION
Install it under an environment that satisfies
the product specifications.
When installing it under an environment that does
not satisfy the product operating temperature
range, apply forced cooling with cooling
equipment.
Operating temperature range: 0 to 55°C
Prohibited
CAUTION
Before installation or wiring, remove the
static electricity from your body.
The static electricity accumulated in the human
body may cause failure of the product.
Prohibited
CAUTION
Do not touch the cables carelessly.
Applying stress to the cables may cause
malfunction or accidents.
Prohibited
CAUTION
Do not insert or remove any cables, and do
not install, remove, or replace the PA912
module or the I/O
base unit while the power
is on.
It may cause an electric shock or malfunction.
When installing the product to the I/O
careful not to snap or bend the TC-net I/O bus
connector pins.
Prohibited
CAUTION
When installing the product to the I/O base
unit, do not break or bend the pins of the
TC-net I/O bus connector.
Prohibited
To Next Page
Loading...
