No. Part name
Procedures
Remarks
Wireless adapter 1) Follow procedures item
2) Remove screw holding the wireless adapter
3) Disconnect the connector for the wireless
adapter
3
4
Front panel 1) Stop operation of the air conditioner and turn
off its main power supply.
2) Open two screw caps and securely remove
screws (2 pcs.) at the front panel.
3) Take off the hooks of front panel from top side
of the back body.
4) Slightly open the lower part of the front panel
then pull the upper part of the front panel
toward you to remove it as shown on figure.
Front panel
Back body
Hooks of
front panel
1
Screw
Cover wireless adapter
Wireless adapter
Wireless adapter
connector
Screw cap
Front panel
Screw
Screw
Air inlet grille
To Next Page
Loading...
