No. Part name
Procedures
Remarks
Electric part
box assembly
5
1) Follow the procedure item 3 .
2) Remove screw holding the electric part cover.
3) Disconnect the connectors for the fan motor
and louver motor from P.C. board assembly.
4) Remove the earth screw and earth line from
evaporator.
5) Pull out TC and TCJ sensor from sensor
holder of the evaporator.
6) Remove the 2 fixing screws that secures the
electric parts box assembly, unit display
assembly and remove the electric parts box
assembly.
Earth screw
Earth line
Washer
TC sensor
or TCJ sensor
Sensor holder
Connectors
Electric part cover
Screw
Screw
Screw
Louver motor connector
Earth line
TC sensor
TA sensor
Fan motor connector (DC)
TCJ sensor
To Next Page
Loading...
