- 17
General Control Specifications Continued:
General Control Specifications
Item Standard specification Option Remarks
PC interface None MODBUS
DEVICE_NET
PROFIBUS
TL-S20
Requires
optional board.
Transmission
Comissionin
g/Maintenan
ce Tool
Ethernet (with modular jack attached to
keypad)
LED 1 lamp
READY: Operation preparation
completed (Green)
RUN: Inverter in operation (Red)
ALARM/FAULT:
Alarm slow flashing/Fault fast flashing
READY and
RUN light
colors can be
reversed by
changing an
EIO parameter
LED 2 lamp
ON - Keypad control
OFF - Other than keypad control
Cubicle
display/
operation
LCD display 128x64 Pixel Graphical LCD display
Operation
apparatus
Backlit type interlock switch: 1
Unlit reset switch: 1
Operation via 8 key keypad and a
15pulse/30detent incremental encoder
Connector Personal computer connection Ethernet
modular jack
Analog signal output
±10VDC x 3 programmable channels
on XIO board
±10VDC x 5 programmable channels
on terminal strip
±10VDC x 2 fixed channels on
terminal strip
Connected
measuring
equipment must
be isolated from
ground
Analog signal input
±10VDC x 2 channels
Connected
source
equipment must
be isolated from
ground
Input: 8 dry contact inputs
7 Programmable:
1 dry contact 24-110Vdc 48-120Vac
6 dry contact 24Vdc
1 Fixed:
1 dry contact 24-110Vdc 48-120Vac
Fixed contact is
always used for
interlocking
control function
Digital input/output
Output: Programmable
1 open collector 24VDC-50mA max
5 open collector 24/50VDC-50mA max
24V contact
always used for
internal control
functions
Commissioning and
Maintenance Tool
Parameter
setting, fault
data display,
etc.
Optional
Software
Package
To Next Page
Loading...
