Central remote controller Owner’s Manual
25
-EN
6 Select the day of week to set using [<] and [>] and the
schedule to set using [∧] and [∨], and then press [ ]
(Confirm).
The “Schedule editing” screen is displayed.
7 Move the cursor using [<] and [>], and set the time using [∧]
and [∨].
You cannot switch the operation unless you set the time.
8 Place the cursor on Operation switching using [<] and [>],
switch to ON or OFF using [∧] and [∨], and then press [ ]
(Confirm).
The “Weekly Schedule” screen is displayed again, with the set
schedule added to the list.
• If you press [ ] (Return) without pressing [ ] (Confirm), the setting
is cancelled and the screen returns to the state it was in before the
change was made.
To Next Page
Loading...
