Toshiba TCB-SC640U-E - Start;Stop Operation of an Individual Air to Water Heat Pump

Central remote controller Owner’s Manual
37
-EN
● NOTE
If necessary, set the temperature, operation mode (Cool/Heat). (P.38)
Start/Stop Operation of an Individual Air to Water Heat Pump
1 Display the “Unit” screen. (P.16)
2 Press [<] [>] to select a Zone then press [∧] [∨] to select an Air
to Water Heat Pump.
To start
3 Press [ ].
The selected Air to Water Heat Pump starts operation and changes
to .
To stop
3 Press [ ].
The selected Air to Water Heat Pump stops operation and changes
to .
3
3
2
(Start)
(Stop)