Toshiba TCB-SC640U-E - Make all the louver settings in the group at once (Louver setting in Group)

Central remote controller Owner’s Manual
53
-EN
● NOTE
Group (Group control): Up to 16 indoor units can be controlled with a single local remote control.
Set “OFF” if you do not want to the louver of the follower unit to be linked.
Make all the louver settings in the group at once (Louver setting in Group)
1 Display the “Control” screen of All, Zone, or Unit (P.15)
2 Press [ ] (Control)
The “Menu” screen is displayed.
3 Select “Louver setting in Group” using [∧] and [∨], and then
press [ ] (Confirm).
The “Admin. Password Entry” screen is displayed.
4 Enter a 4-digit password, and then press [ ] (Confirm).
Select the digit position using [<] and [>], and select a number using
[∧] and [∨].
The “Louver setting in Group” screen is displayed.
5 Select “ON” or “OFF” using [∧] and [∨], and then press [ ]
(Confirm).
If you press [ ] (Return), the “Menu” screen is displayed again.
• By default, “ON” is set.