Toshiba TCB-SC640U-E - 4-2. Air to Water Heat Pump; Start;Stop Operation; Start;Stop Operation of All Air to Water Heat Pumps

Central remote controller Owner’s Manual
35
-EN
4-2. Air to Water Heat Pump
This section explains commonly used functions such as starting/stopping air conditioner operation, set temperature, and
operation mode.
● NOTE
If necessary, set the temperature, operation mode (Cool/Heat). (P.38)
Start/Stop Operation
CAUTION
Always turn off the power circuit breaker if the product malfunctions due to lightning or wireless, etc. during
operation. (Cause of failure)
Start/Stop Operation of All Air to Water Heat Pumps
1 Display the “All” screen. (P.16)
To start
2 Press [ ].
The confirmation screen is displayed.
3 Press [∧] [∨] to select “Yes”, then press [ ] (Confirm).
All Air to Water Heat Pump start operation, and the Run lamp lights up.
To stop
2 Press [ ].
The confirmation screen is displayed.
3 Press [∧] [∨] to select “Yes”, then press [ ] (Confirm).
All Air to Water Heat Pump stop operation, and the Run lamp turns off.
2
2
3
Run lamp
(Start)
(Stop)