Toshiba TCB-SC640U-E - Start;Stop Operation of All Air to Water Heat Pump in a Zone

Central remote controller Owner’s Manual
36
-EN
● NOTE
If necessary, set the temperature, operation mode (Cool/Heat). (P.38)
Start/Stop Operation of All Air to Water Heat Pump in a Zone
1 Display the “Zone” screen. (P.16)
2 Press [∧] [∨] [<] [>] to select a Zone.
The selected Zone is highlighted.
To start
3 Press [ ].
The confirmation screen is displayed.
4 Press [∧] [∨] to select “Yes”, then press [ ] (Confirm).
All Air to Water Heat Pump in the selected Zone start operation and
changes to .
To stop
3 Press [ ].
The confirmation screen is displayed.
4 Press [∧] [∨] to select “Yes”, then press [ ] (Confirm).
All Air to Water Heat Pump in the selected Zone stop operation and
changes to .
3
3
2, 4
(Start)
(Stop)