Toshiba TE2 Series - Page 99

TE2 Series Digital Solid State Soft Starter User Manual 90 | Page
5.5.15 Motor Power Protection Settings
Fn # Group Function Description Adjustment / Display Range
Setting
Increments
Factory
Setting
Setting
F102
Power Protection
Motor KW Trip
0 - 2
0 = Disabled
1 = Over KW Trip
2 = Under KW Trip
1 0
F103 Motor KW Trip Point 20 - 100% of full load KW 1% 50(%)
F104 Motor KW Trip Delay Time 1 - 999 seconds 1 1
F105 Power Factor Trip Range
0, 1 - 3 [0=Disabled, 1=lag, 2=lead,
3= lead/lag]
1 0
F106 Power Factor Trip Point .01 - 1 .01 .50
F107 Power Factor Trip Delay Time 1 - 20 seconds 1 2
Fn # Group Function Description Adjustment / Display Range
Setting
Increments
Factory
Setting
Setting
F108
Power Protection
Analog Output
0 - 12, 0: OFF;
See Page 62 for settings.
1 OFF
F109 Analog Output 4mA 0 - 9999 1 0
F110
Analog Output 20mA 0 - 9999 1 9999
Fn # Group Function Description Adjustment / Display Range
Setting
Increments
Factory
Setting
Setting
F111
System Settings
Default Display 1 - 12 (See Table of Default Display) 1 10
F112 System Settings Reserved for factory - -
F113
Alternate functions for
Ramp2/Jog inputs
See Table page 64 1 7