Toshiba TEC EO1-32003 - Unit Price Change

10. PROGRAMMING PROCEDURES
10.1 PLU DATA EDIT
10- 4
10.1 UNIT PRICE CHANGE
Menu Page: 1
Item No.: 0
In this procedure, use the operation keys (except when calling a PLU by using a speed key).
The unit price stored in a PLU can be changed with this menu.
NOTES:
1. Calling a PLU # that has not been stored in the PLU file results in an error.
2. Under this Menu (Menu No. 0), “open-price” PLU’s price cannot be changed.
Enter the PLU #
Enter the
Speed key #
<MENU>
Page 1
Change the unit price
(max. 4 digit)
Speed key
Page 1
↔
Page 2
0
NEXT
PLU
TEST
PROG.
ESC.
<MENU>
Page 1
Main
<MENU>
a
VOID
or
a
◇
PRT
*
PRT
*